Wood as a differentiating element in the ASUS ProArt PA401 Wood Edition tower

ASUS repeats with this tower the strategy it followed with its ProArt PA602 “Wood Edition” and adopts wood as a differentiating material at various points in the external design.

We refer to the new ASUS ProArt PA401 Wood Edition, a somewhat smaller variant than its older sister, but which has a design that follows the same lines for work equipment and premium workstations that do not clash with the environment.

The ASUS ProArt PA401 Wood Edition It measures 412 x 225 x 503 mm, so it loses support for E-ATX motherboards and is left with space for motherboards. ATXmicroATX and Mini-ITX. It is built with a mixture of steel, ABS plastic and wood, added to the tempered glass of the window of the specific variant with this material.

Supports graphics cards up to 31.5cm, 16cm CPU coolers and ATX power supplies limited to 17cm. The cooling is complemented by 3 pre-installed fans, of which the two large 160mm PWM models from the front. In total, it is possible to place up to 6 fans throughout the entire case; Not in vain is a HUB included for 5 PWM fans.

There is space for 2 2.5-inch drives and another 2 2.5 or 3.5″ drives for hard drives or SSDs. There are also 7 slots for expansion cards.

At the connectivity level, its USB-C 3.2 Gen 2×2 20 Gbps port stands out, accompanied by two conventional USB 3.0 5 Gbps and a minijack combo for audio and microphone. On the other hand, 34 mm is the space for cable management that we have on the back.

End of Article. Tell us something in the Comments!