Gaming

G.Skill Introduces CL26 and CL28 Low Latency DDR5 Modules Compatible with AMD EXPO


G.Skill Introduces CL26 and CL28 Low Latency DDR5 Modules Compatible with AMD EXPO



For this next generation of AMD processorsthe Ryzen 9000 Seriesit is better to have a DDR5 RAM that has a reduced latency. In this way, the potential of these new CPUs will be better used, including the reference for gaming. Ryzen 7 9800X3Dalong with greater performance on boards that have the chipset designed for this generation, the X870 and X870E. To meet this demand, G.Skill has presented new DDR5 memories with reduced latency CL26 and CL28.

Geeknetic G.Skill Introduces CL26 and CL28 Low Latency DDR5 Modules Compatible with AMD EXPO 1

These are the new G.Skill memories in their ranges Trident Z5 Royal Neo, Trizen Z5 Neo RGB and Ripjaws M5 RGB Neo Series. With a configuration DDR5 at 6,000 MT/s and with a latency CL26-36-36-96 You have two kits available, one with 32GB formed by two 16 GB modules and another of 64GB which includes two 32 GB modules. These are compatible with AMD EXPO and have been tested on a plate ASUS ROG Crosshair X870E Hero along with a AMD Ryzen 9 9900X.

Geeknetic G.Skill Introduces CL26 and CL28 Low Latency DDR5 Modules Compatible with AMD EXPO 2

It is also available with non-binary memory amounts, these are 48GB and 96GB available in kits 2 x 24 GB and 2 x 48 GB. These have a latency CL28-36-36-96 along with a speed of 6,000 MT/s. They have also been tested on the same board and CPU as the previous ones to test their compatibility with AMD EXPO. With AMD EXPO you will only have to enable profile for best performance with your RAM memory modules.

Geeknetic G.Skill Introduces CL26 and CL28 Low Latency DDR5 Modules Compatible with AMD EXPO 3

For now There are no prices for these different memory kits low latency brought to you by G.Skill

End of Article. Tell us something in the Comments!

Article Editor: Juan Antonio Soto

Juan Antonio Soto

I am a Computer Engineer and my specialty is automation and robotics. My passion for hardware began at the age of 14 when I broke down my first computer: a 386 DX 40 with 4MB of RAM and 210MB of hard drive. I continue to give free rein to my passion in the technical articles I write for Geeknetic. I dedicate most of my free time to video games, contemporary and retro, on the more than 20 consoles I have, in addition to the PC.

Source link