Gaming

FSP has released a dual-tower, dual-fan cooler with 7 heatpipes

This COMPUTEX 2023 we have been able to see new products manufacturer FPSnot only new power supplies, but has expanded its field adding cooling solutions for CPUs. We have also been able to see a new box, available in two colors, which is pre-installed with the CPU and motherboard cabling system. Focusing on new cooling solutions, FPS has shown both an airborne solution as AiO liquid coolingwhich is also available at three sizes.

Geeknetic FSP has released a dual-tower, dual-fan cooler with 7 heatpipes 1

The huge air-cooled CPU cooler, the FSP MX 09has a design of double tower to which they conduct heat 7 heat pipes. Includes two fanseach of them different in size and producing a sound of approximately 30 dBA working to the max. The fan that is attached to the RAM memories has a size of 120 mm to clear some space for when we install taller modules or with RGB. On the opposite side there has also been trimmed tower fins to make room for the VRM heatsinks on the motherboards. It also has a 160mm height to install in boxes with a smaller width.

Geeknetic FSP has released a dual-tower, dual-fan cooler with 7 heatpipes 2

The fan in the center FSP DF14 with 140mm, it has a rounded chassis design to which “corners” can be added to install it on any 140 mm support. This fan can work from 600 up to 1,650 RPM and offers an air flow of 76.7 CFM and a pressure of 2.07 mm H2O. This model can also be purchased separately, and can be used for both tower and case fans. The smallest fan, the FSP HF12works from 600 up to 2,000 RPM with a flow of 62.1 CFM and a pressure of 2.40 mm H20. The sound they produce is 30.8dBA for the smallest and 29.6dBA the largest and have a 3-phase motor and 6 stages.

Geeknetic FSP has released a dual-tower, dual-fan cooler with 7 heatpipes 3

The heatsink has a total weight of 1,290g and is available for different sockets from AMD (AM4 and AM5) and Intel latest LGA115X, 1200, 1700, and even for 2066 and 2011v3. To facilitate the installation of the heatsink, without having to remove or put other components, it has been left a space next to the central fan to insert the included tool that allows you to firmly fix the heatsink to the CPU. The top of the towers with the heatsink fins feature a cap that adds a stylish touch to this massive new FPS heatsink.

End of Article. Tell us something in the Comments!

Source link